X-FDBK identifies the precise frequencies that cause feedback and surgically cuts them, dramatically shortening the setup time of monitors and PA speakers.
X-FDBK is the first plugin ever to provide a complete automatic feedback suppression solution. Whether you're an FOH engineer mixing for thousands or a singer performing with your own compact PA system, you can now get a loud, clear and feedback-free mix in seconds. This way you have one less thing to worry about and you can focus on what's really important – your mix.
The problem
One of the most important steps before any soundcheck or show is “ringing out” the wedges and PA – pushing them to a volume that produces audible feedback, then identifying the feedback frequencies and cutting those frequencies using a graphic equalizer. Doing this by ear is slow, painful, imprecise, and hence not completely effective. Moreover, to avoid feedback the monitors are often being tamed; as a result, the performers can't hear themselves loud enough.
The solution
X-FDBK dramatically improves the “ringing out” process and shortens it to a matter of seconds. It identifies the feedback frequencies quickly and precisely and cuts them with a narrow notch, preserving the fidelity of the wedge or PA and enabling you to maximize the gain without getting feedback.
All you need to do is turn up the levels on your wedges and PA until they start to feedback. Then activate the plugin and wait a few seconds until you hear the feedback disappear.
The plugin's graphic frequency spectrum shows you all feedback frequencies and the degree to which they were cut, letting you tweak them manually if you wish.
Take Control
Everyone wants their monitors and PA as loud and clear as possible and without any feedback. With X-FDBK, you can achieve this easily within seconds.
Product Details:
- Automatically cuts the frequencies that cause feedback
- Get a clearer, louder, feedback-free sound from your monitors and PA
- Set it and forget it
- Dramatic improvement to your live sound and workflow
- Quick and easy to use
- A must-have survival tool for any live sound engineer or live performer
X-FDBK (V9) - Supported Platforms
X-FDBK (V9) - Sample Rate
All Waves plugins support 44.1 kHz and 48 kHz; most support higher sample rates.
Avid VENUE supports up to 48 kHz.
X-FDBK (V9) - Channel Components
X-FDBK (V9) - Latency
The table below indicates how much latency is produced by each plugin, in samples.
Not all plugins support all platforms (MultiRack, StudioRack, eMotion, Venue). Check the Supported Platforms table for more info.
System Requirements:
Mac:
CPU
- Intel Core i3 / i5 / i7 / Xeon
RAM
- 4 GB
Operating System
- 10.9.5 - 10.11
Screen Resolution
- Minimum: 1024x768
- Recommended: 1280x1024 / 1600x1024
- USB displays are not supported as the primary display.
Windows:
CPU
- Intel Core i3 / i5 / i7 / Xeon
RAM
- 4 GB
Operating System
- Windows 7 with SP1 64 bit
- Windows 8.1 64 bit
- Windows 10 64 bit
Screen Resolution
- Minimum: 1024x768
- Recommended: 1280x1024 / 1600x1024
*Most Audio Hosts:
Windows:
Pro Tools 11.3.2 - 12.5 (AAX Native 64-bit)
Pro Tools 10.3.8 - 10.3.10 (RTAS)
Ableton Live 9.1.6 - 9.6.1 (VST)
Nuendo 6.5.35 - 7.0.30 (VST3)
Cubase 7.5.30 - 8.5 (VST3)
WaveLab 8.5, 9.0.10 (VST3)
Sonar X3e (VST3), Platinum (VST3)
Acid 7.0e (VST)
Audition CC2014, CC2015 (VST3)
Samplitude Pro X (VST), Pro X2 (VST3)
Sequoia 12 - 13 (VST)
Pyramix 9.0.7 - 9.1.6 (VST)
Studio One 3.1 - 3.2 (VST3)
FL Studio 12.1.3 - 12.2 (VST3)
REAPER 5.18 (VST3)
Mac:
Pro Tools 11.3.2 - 12.5 (AAX Native 64-bit)
Pro Tools 10.3.10 (RTAS)
Logic Pro X 10.2 - 10.2.2 (Audio Units)
Digital Performer 9.0 - 9.0.2 (Audio Units)
Ableton Live 9.2.2 - 9.6.1 (VST)
Nuendo 7.0.20 - 7.0.30 (VST3)
Cubase 8.0.30 - 8.5 (VST3)
WaveLab 9.0.10 (VST3)
Main Stage 3.2 - 3.2.3 (Audio Units)
Garage Band 10.1.0 (Audio Units)
Audition CC2015 (VST3)
Studio One 3.1 - 3.2 (VST3)
REAPER 5.18 (VST3)
- Automatically cuts the frequencies that cause feedback
- Get a clearer, louder, feedback-free sound from your monitors and PA
- Set it and forget it
- Dramatic improvement to your live sound and workflow
- Quick and easy to use
- A must-have survival tool for any live sound engineer or live performer
X-FDBK (V9) - Supported Platforms
X-FDBK (V9) - Sample Rate
All Waves plugins support 44.1 kHz and 48 kHz; most support higher sample rates.
Avid VENUE supports up to 48 kHz.
X-FDBK (V9) - Channel Components
X-FDBK (V9) - Latency
The table below indicates how much latency is produced by each plugin, in samples.
Not all plugins support all platforms (MultiRack, StudioRack, eMotion, Venue). Check the Supported Platforms table for more info.
System Requirements:
Mac:
CPU
- Intel Core i3 / i5 / i7 / Xeon
RAM
- 4 GB
Operating System
- 10.9.5 - 10.11
Screen Resolution
- Minimum: 1024x768
- Recommended: 1280x1024 / 1600x1024
- USB displays are not supported as the primary display.
Windows:
CPU
- Intel Core i3 / i5 / i7 / Xeon
RAM
- 4 GB
Operating System
- Windows 7 with SP1 64 bit
- Windows 8.1 64 bit
- Windows 10 64 bit
Screen Resolution
- Minimum: 1024x768
- Recommended: 1280x1024 / 1600x1024
*Most Audio Hosts:
Windows:
Pro Tools 11.3.2 - 12.5 (AAX Native 64-bit)
Pro Tools 10.3.8 - 10.3.10 (RTAS)
Ableton Live 9.1.6 - 9.6.1 (VST)
Nuendo 6.5.35 - 7.0.30 (VST3)
Cubase 7.5.30 - 8.5 (VST3)
WaveLab 8.5, 9.0.10 (VST3)
Sonar X3e (VST3), Platinum (VST3)
Acid 7.0e (VST)
Audition CC2014, CC2015 (VST3)
Samplitude Pro X (VST), Pro X2 (VST3)
Sequoia 12 - 13 (VST)
Pyramix 9.0.7 - 9.1.6 (VST)
Studio One 3.1 - 3.2 (VST3)
FL Studio 12.1.3 - 12.2 (VST3)
REAPER 5.18 (VST3)
Mac:
Pro Tools 11.3.2 - 12.5 (AAX Native 64-bit)
Pro Tools 10.3.10 (RTAS)
Logic Pro X 10.2 - 10.2.2 (Audio Units)
Digital Performer 9.0 - 9.0.2 (Audio Units)
Ableton Live 9.2.2 - 9.6.1 (VST)
Nuendo 7.0.20 - 7.0.30 (VST3)
Cubase 8.0.30 - 8.5 (VST3)
WaveLab 9.0.10 (VST3)
Main Stage 3.2 - 3.2.3 (Audio Units)
Garage Band 10.1.0 (Audio Units)
Audition CC2015 (VST3)
Studio One 3.1 - 3.2 (VST3)
REAPER 5.18 (VST3)