Developed under license from DTS®, this plugin suite converts mono audio sources into stereo content, which can then be turned into 5.1 or 7.1 surround.
DTS Neural™ Mono2Stereo is a high-quality stereo synthesis tool that assists in the creation of surround content for live broadcast, production and post-production. DTS Neural Mono2Stereo gives you complete control over how mono elements are positioned and perceived in the final stereo mix. You can render mono channels into stereo for stereo broadcast and streaming. The resulting stereo content can then be converted to 5.1 or 7.1 surround using the DTS Neural Surround UpMix plugin.
When using DTS Neural Mono2Stereo in multiple instances on sub-mixes or individual mono sources, audio elements can be spatially separated to preserve intelligibility and create an enveloping image that is nearly indistinguishable from native stereo content.
DTS Neural Mono2Stereo is typically used in live broadcasts of sports events, music performances and award shows. For example, to deliver a compelling experience to audiences watching a live sports event, it is imperative to capture all of the sights and sounds of the game or the race. Ambient sounds such as crowd noise, racing car engines, cracking baseball bats, or comments from the football field are often captured as mono sources. The challenge for mixers is to arrange all these complex elements into an immersive mix without masking the announcer's play-by-play commentary.
With the DTS Neural Mono2Stereo plugin, broadcast engineers can easily create a spectrally balanced stereo image from mono sources, for accurate placement in a 5.1 or 7.1 mix. This way the ambient effects can be decoded and reproduced as the mixer had intended, preventing unwanted ambient content from being steered directly to the center channel.
DTS Neural™ Mono2Stereo is a high-quality stereo synthesis tool that assists in the creation of surround content for live broadcast, production and post-production. DTS Neural Mono2Stereo gives you complete control over how mono elements are positioned and perceived in the final stereo mix. You can render mono channels into stereo for stereo broadcast and streaming. The resulting stereo content can then be converted to 5.1 or 7.1 surround using the DTS Neural Surround UpMix plugin.
When using DTS Neural Mono2Stereo in multiple instances on sub-mixes or individual mono sources, audio elements can be spatially separated to preserve intelligibility and create an enveloping image that is nearly indistinguishable from native stereo content.
DTS Neural Mono2Stereo is typically used in live broadcasts of sports events, music performances and award shows. For example, to deliver a compelling experience to audiences watching a live sports event, it is imperative to capture all of the sights and sounds of the game or the race. Ambient sounds such as crowd noise, racing car engines, cracking baseball bats, or comments from the football field are often captured as mono sources. The challenge for mixers is to arrange all these complex elements into an immersive mix without masking the announcer's play-by-play commentary.
With the DTS Neural Mono2Stereo plugin, broadcast engineers can easily create a spectrally balanced stereo image from mono sources, for accurate placement in a 5.1 or 7.1 mix. This way the ambient effects can be decoded and reproduced as the mixer had intended, preventing unwanted ambient content from being steered directly to the center channel.
Product Details:
- Developed under license from DTS
- The industry standard for live sports and music broadcasts; internet streaming and webcasting; film, radio and TV post-production
- Turn any mono source into stereo
- Active Correction Technology fixes issues such as comb filtering, spatial location and distortion
- Precise mapping of mono signals into a balanced stereo fieldStereo width control
- Selectable mono/stereo crossover frequency for improved imaging
DTS Neural™ Mono2Stereo (V9) - Supported Platforms
DTS Neural™ Mono2Stereo (V9) - Sample Rate
All Waves plugins support 44.1 kHz and 48 kHz; most support higher sample rates.
Avid VENUE supports up to 48 kHz.
DTS Neural™ Mono2Stereo (V9) - Channel Components
DTS Neural™ Mono2Stereo (V9) - Latency
The table below indicates how much latency is produced by each plugin, in samples.
Not all plugins support all platforms (MultiRack, StudioRack, eMotion, Venue). Check the Supported Platforms table for more info.
System Requirements:
Mac:
CPU
- Intel Core i3 / i5 / i7 / Xeon
RAM
- 4 GB
Operating System
- 10.9.5 - 10.11
Screen Resolution
- Minimum: 1024x768
- Recommended: 1280x1024 / 1600x1024
- USB displays are not supported as the primary display.
Windows:
CPU
- Intel Core i3 / i5 / i7 / Xeon
RAM
- 4 GB
Operating System
- Windows 7 with SP1 64 bit
- Windows 8.1 64 bit
- Windows 10 64 bit
Screen Resolution
- Minimum: 1024x768
- Recommended: 1280x1024 / 1600x1024
*Most Audio Hosts:
Windows:
Pro Tools 11.3.2 - 12.5.2 (AAX Native 64-bit)
Pro Tools 10.3.8 - 10.3.10 (RTAS)
Ableton Live 9.1.6 - 9.6.2 (VST)
Nuendo 6.5.35 - 7.1 (VST3)
Cubase 7.5.30 - 8.5 (VST3)
Sonar X3e (VST3), Platinum (VST3)
Vegas 12 - 13 (VST)
Acid 7.0e (VST)
Audition CC2014, CC2015 (VST3)
Adobe Premiere CC2014, CC2015 (VST3)
Samplitude Pro X (VST), Pro X2 (VST)
Sequoia 12 - 13 (VST)
Pyramix 9.0.7 - 9.1.6 (VST)
Studio One 3.1 - 3.2.3 (VST3)
Media Composer 7.0.4 (RTAS), 8.1, 8.4 - 8.5.2 (AAX Native)
FL Studio 12.1.3 - 12.3 (VST3)
REAPER 5.18 - 5.22 (VST3)
Mac:
Pro Tools 11.3.2 - 12.5.2 (AAX Native 64-bit)
Pro Tools 10.3.10 (RTAS)
Logic Pro X 10.2 - 10.2.4 (Audio Units)
Digital Performer 9.0 - 9.0.2 (Audio Units)
Ableton Live 9.2.2 - 9.6.2 (VST)
Nuendo 7.0.20 - 7.1 (VST3)
Cubase 8.0.30 - 8.5 (VST3)
Audition CC2015 (VST3)
Adobe Premiere CC2015 (VST3)
Studio One 3.1 - 3.2.3 (VST3)
Media Composer 8.4.1 - 8.5.2 (AAX Native)
REAPER 5.18 - 5.22 (VST3)
- Developed under license from DTS
- The industry standard for live sports and music broadcasts; internet streaming and webcasting; film, radio and TV post-production
- Turn any mono source into stereo
- Active Correction Technology fixes issues such as comb filtering, spatial location and distortion
- Precise mapping of mono signals into a balanced stereo fieldStereo width control
- Selectable mono/stereo crossover frequency for improved imaging
DTS Neural™ Mono2Stereo (V9) - Supported Platforms
DTS Neural™ Mono2Stereo (V9) - Sample Rate
All Waves plugins support 44.1 kHz and 48 kHz; most support higher sample rates.
Avid VENUE supports up to 48 kHz.
DTS Neural™ Mono2Stereo (V9) - Channel Components
DTS Neural™ Mono2Stereo (V9) - Latency
The table below indicates how much latency is produced by each plugin, in samples.
Not all plugins support all platforms (MultiRack, StudioRack, eMotion, Venue). Check the Supported Platforms table for more info.
System Requirements:
Mac:
CPU
- Intel Core i3 / i5 / i7 / Xeon
RAM
- 4 GB
Operating System
- 10.9.5 - 10.11
Screen Resolution
- Minimum: 1024x768
- Recommended: 1280x1024 / 1600x1024
- USB displays are not supported as the primary display.
Windows:
CPU
- Intel Core i3 / i5 / i7 / Xeon
RAM
- 4 GB
Operating System
- Windows 7 with SP1 64 bit
- Windows 8.1 64 bit
- Windows 10 64 bit
Screen Resolution
- Minimum: 1024x768
- Recommended: 1280x1024 / 1600x1024
*Most Audio Hosts:
Windows:
Pro Tools 11.3.2 - 12.5.2 (AAX Native 64-bit)
Pro Tools 10.3.8 - 10.3.10 (RTAS)
Ableton Live 9.1.6 - 9.6.2 (VST)
Nuendo 6.5.35 - 7.1 (VST3)
Cubase 7.5.30 - 8.5 (VST3)
Sonar X3e (VST3), Platinum (VST3)
Vegas 12 - 13 (VST)
Acid 7.0e (VST)
Audition CC2014, CC2015 (VST3)
Adobe Premiere CC2014, CC2015 (VST3)
Samplitude Pro X (VST), Pro X2 (VST)
Sequoia 12 - 13 (VST)
Pyramix 9.0.7 - 9.1.6 (VST)
Studio One 3.1 - 3.2.3 (VST3)
Media Composer 7.0.4 (RTAS), 8.1, 8.4 - 8.5.2 (AAX Native)
FL Studio 12.1.3 - 12.3 (VST3)
REAPER 5.18 - 5.22 (VST3)
Mac:
Pro Tools 11.3.2 - 12.5.2 (AAX Native 64-bit)
Pro Tools 10.3.10 (RTAS)
Logic Pro X 10.2 - 10.2.4 (Audio Units)
Digital Performer 9.0 - 9.0.2 (Audio Units)
Ableton Live 9.2.2 - 9.6.2 (VST)
Nuendo 7.0.20 - 7.1 (VST3)
Cubase 8.0.30 - 8.5 (VST3)
Audition CC2015 (VST3)
Adobe Premiere CC2015 (VST3)
Studio One 3.1 - 3.2.3 (VST3)
Media Composer 8.4.1 - 8.5.2 (AAX Native)
REAPER 5.18 - 5.22 (VST3)